Home / Themes / Support

InVogue Theme

  • Documentation
  • Faq
  • Knowledge Base
  • Submit a ticket

Quick Start Guidecopy link

Once you have installed the latest version of WordPress (wordpress.org), then you can start with the theme install.

Installing WordPress for Newbies

For 1st time WordPress users, please have a look at the install guide from WordPress. http://codex.wordpress.org/Installing_WordPress

Installing the InVogue Theme

Download the theme from your ThemeForest Downloads page. You will need to first unzip this file and within the folder locate the ‘invogue.zip’ file which will then be used for the theme installation.

Open your WordPress backend and browse to “Appearance” in the side navigation.

Click on “Themes”. On this page you will find an “Add New” button at the top. Click it and go to the “Add Themes” page. Here you will find an “Upload Theme” button. Click it and upload your ‘invogue.zip’ zip file.

add_new_theme

upload_theme

You will now see an “Install Now” button, which you can now click to install. This process will take a few seconds.

After successfully uploading of the theme, you will now see the theme displayed with the other standard themes and you can now activate InVogue by clicking on the “Activate” Button.

activate_theme

Install plugins that’s required

After you have activated the theme, you will be presented with a notification at the top of the screen that suggest you install the plugins required for the theme to function properly.

1_required_plugins

Please install and then activate “inVogue Utility Plugin”, “inVogue Visual Composer”, “inVogue Slider Revolution” and “WooCommerce”.

2_install_plugins

3_install_plugins_complete

4_activate_plugins

5_activate_plugins_complete

Please note that inVogue theme requires these 3 plugins to function correctly.

Run WooCommerce Setup Wizard

You will now see an alert box at the top of your screen in the WP backend that notifies you to run the WooCommerce setup wizard.

woo1

Please finish all 5 steps and start upload your products. Uploading and adding products will be covered further down the page.

woo2

Page creation

Lets start off by setting up a few pages.

Browse to “Pages” in your WP side bar.

Add new page.

Create the pages needed for your website. Home, Shop, Contact, About etc.

add_new_page

Create a page by adding a page and then press “Publish” in your right hand side bar.

Assigning your pages to your main navigation

Browse to Appearance / Menus in your WP sidebar

Create a main menu for your site by typing the main menu name and then clicking “Create Menu”

assigning_menu_items1

You will see a list of pages on the left.

Select the ones that you want to display in your main menu and click “Add to Menu”

assigning_menu_items2

Also make sure that you assign the menu to the right area of the site by going to “Manage Locations” or setting it to Primary Menu as shown below.

assigning_menu_items3

Assign the right Home page as Home

Browse to “Settings / Reading” and click Static Page and then click on the “Front Page” dropdown and select your Home page and Save.

ReadingSettings

Assign your Blog to the right page

Browse to “Settings / Reading” and click Static Page and then click on the “Post Page” dropdown and select your Post page and Save.

blog_set

Assign the right Shop page as Shop

First set up a Shop page like all other pages. Make sure you assign it to the Primary Navigation. Now browse to WooCommerce / Settings / Products. Now assign your “Shop” page from the dropdown in step 4.

woo_assign_shop_page

Building beautiful layouts

Visual Composer is included to build a responsive website and manage your content easily with an intuitive WordPress Front end editor. No programming knowledge required – create stunning and beautiful pages with award winning drag and drop editor.

Please note: For all page elements that contains products or blog posts, you must set these up first. Browse to products in the sidebar and add your products. Also browse to Posts in your sidebar and add your blog posts. Adding products to WooCommerce can be found further down this page.

Home Page – Browse to Pages / All Pages and open your Home page.

PagesHome

Click on the blue BACKEND EDITOR button and then on the light blue “Add Element” button

new_page

VC

The below popup will now appear and you can start adding elements to your page. Everything you see here was used to create our demo pages.

elements

You will click on the element that you want to add and then the element popup will appear for you to edit. Example of a popup below.

element_popup

Edit this popup and click Save Changes and you will have the first element on your page.

You can now repeat this process and add more elements on the page by clicking on the Plus button.

VC_add_items

Remember to hit the “Publish” or “Update” button in your right hand side bar every time you add elements to the page.

Previewing your work

To preview this page in a browser window, click on the “View Page” button in the top gray bar. (Preferably – Right click and Open in new tab)

Keep this preview open in another browser tab so you can flip between the 2 tabs, editing in the one and previewing in the other.

PreviewPage

Order elements on your page

Drag and drop elements on your page by grabbing the arrow and dragging the element up or down to the position you want.

drag_n_drop

Delete an element

Click on the bin button to delete an element off the page

delete_element

Demo Page Activationcopy link

These are pre built layouts that can be switched on with ease. These demos can be found here. Browse to the InVogue settings page via the WordPress side bar Appearance / inVogue Settings and browse to the Demos section.

1_demos-2

Please note that you will loose all previous data on the page that you are now building. It might be a better idea to create a blank page first and then do the demo installation on that page and once you are happy, then rename that page as the page that you wanted it to be.

Once you have selected your demo and assigned it to the right page, you can then browse to your page via the WP side bar / Pages.

Open the relevant page and you will see a layout that was now imported from the demo.

This will reflect the layout that was just selected. Click on View Page in the top gray bar to see your new layout.

Please note that this is purely the demo layout and no images or products from our main InVogue demo site are included. You need to now edit each element and make it your own.

Editing each of these elements are easy and can be found further down the page.

home_template

Please also note that some demo pages will need some extra work to make it look exactly like the inVogue demo. E.g. if you want the Home page to have a slider at the top, then you have to assign a template to that home page. Example above.

Note: With all new demo releases, please make sure you update your theme to the latest version to get these demos.

Always make sure you are viewing your pages in “Backend Editor Mode”

BackendView

Elementscopy link

These are sections that can be added in various areas of the website, but mostly the home page. All our demo pages are built using these elements.

They can be added after each other on the home page to create the look you are after and they can also be dragged up or down the page to put them in the order you are looking for.

Start off by making sure you switch to “Backend Editor” as shown below.

backen_editor

When you start on a blank page you might see the following and you can click on the blue “Add Element” button.

VC

You will then see this popup with all elements to choose from.

elements

Click on a element to add to the page and you will see another popup where you will now do all the settings for that specific element before adding it to the page.

VC_popup

You can now add more elements to the page by clicking on the plus sign in the middle

VC_add_items

You can go back and edit an element by clciking on the green edit button and editing the popup.

edit_element

Below we’ll explain how to add all elements and how to style them.

Order elements on your page

Drag and drop elements on your page by grabbing the arrow and dragging the element up or down to the position you want.

drag_n_drop

Delete an element

Click on the bin button to delete an element off the page

delete_element

Rows

Rows should only be used when you want to add columns for text or text areas. All other elements will create it’s own row and will add the element in that row.

Text Block

Front end preview:

text_block

In the popup window you can now add some text. Adding “H” tags can be added as well if you click on the “Text” tab in the top right corner.

TextSettings2
Hit Save and your text block will be added to the page.

Adding more columns to your text area can be done by clicking on the appropriate layout and then adding more text.

columns

Please note that this is the only element that you can add columns to. The rest of the element creates their own rows and columns should not be changed.

Icons

Front end preview:

text_block

Want to add an icon next to or above some text, then you can do it the following way.

Lets work on the following example from the contact page.

Start off my adding a “Row” Element.

First start off by adding a row element
Now split that row into 3 columns (Hand 1)
Click on the plus sign in the middle of the column and add Icon (Hand 2)
Adding text underneath the icon – Click on the plus below the icon and add Text Block (Hand 3)

text1

text2

Banner

Front end preview:

text_block

Add a Title and Content and set your banner height. Enable the button and add a background image if you want. Add a URL and hit Save.

Launch Pads

Front end preview:

text_block

Click on the Plus sign to add more launchpads next to each other and click on the arrow to edit them.

Content Title

Front end preview:

text_block

Use this to add H2 titles in-between elements on your page.
Add a title and subtitle if needed and select the layout for your title.
The font can be changed by going to the inVogue Settings panel and browsing to the”Typography” section.

Blog Posts

Front end preview:

text_block

This will display the latest 2 posts next to each other from a specific category.

Blog Posts Carousel

Front end preview:

text_block

This will add a blog post carousel to the page. You can set the layout as contained on the page or run it full-page width.

Contained – select this and your content will run the width of the website in the middle of the page.

Full width – Set the layout to Full Row and it will run from edge to edge of the screen.
Hit save and change one more setting to allow it to run full-page width.

Click on the edit button of the row container

row_edit1

A Row Settings popup will appear and change it from “Default” to “Stretch row and content”

row_settings_full_width

Testimonial Slider

Front end preview:

text_block

Start off by adding a few testimonials first.
Browse to “Testimonials” in your WordPress left hand side bar.
Add a few and save.
Go back to your page where you want to add the testimonials.
Add the testimonial element and edit the necessary settings.

Instagram

Front end preview:

text_block

Your latest Instagram photos will be pulled in once you have entered your Title, User ID and Access Token
You can get your id here https://codeofaninja.com/tools/find-instagram-user-id 
You can get your access token here https://www.codeofaninja.com/2015/05/get-instagram-access-token.html

Now you need to set the width to run fullscreen. Click on the edit button of the row container

row_settings_full_width2

A Row Settings popup will appear and change it from “Default” to “Stretch row and content”

row_settings_full_width

If you want to run this element tight on the footer of your page, then change the margin to “Margin Top” in the same Row Settings popup. This will make sure there’s no gap between the Instagram element and the footer. This setting is in the same Row Settings popup.

LookBooks

Front end preview:

text_block

Start off by setting up a few look books under “Lookbooks” in your WP sidebar.
Add New page – Add a lookbooks gallery by uploading a few pics.
Add a featured image in the right sidebar – this will be used in the element slider.
Add a main image for this LookBooks page – Add the background image and add a page heading and some extra text if needed.
Adding text to the page – Use Visual Composer to add a row and split the row the way you want it and add some text to them.

Now go back to your page where you want to add the lookbooks slider.
In the Lookbooks slider popup, type in the look book names you want to display

Contact Form

Front end preview:

text_block

This will add a contact from to your site with the following fields.
First Name, Last Name, Email Address, Message Type, Message.
The email subject could be something like “message from my site” just so you know where the mail is from. The email will be sent to the site admin email address.

Signup Form

Front end preview:

text_block

This element can be added if you want people to sign up for your newsletter, or just to capture email addresses.
Add a title and subtitle and hit save.
All these email addresses will be saved in your database and can be viewed via “Signups” in your WP sidebar.
You can export this list via your InVogue settings panel. Browse to Import/Export and go down the page. You’ll find this at the bottom of the page.

Google Map

Front end preview:

text_block

Add your map latitude and longitude (This will be the center point of the map)
Select the map style (we have included 6 and will add more later)
Then add markers at the bottom by adding its latitude and longitude.
Add as many as you want.
Also add your own custom marker.

Line Separator

Front end preview:

text_block

Here you can add a thin one-pixel line to separate content.
You can change the color of the line and if it should be full width or contained.
If you want it to run the full width of your screen, then also change the following setting.

Click on the edit button of the row container

row_settings_full_width2

A Row Settings popup will appear and change it from “Default” to “Stretch row and content”

row_settings_full_width

Products

Front end preview:

text_block

Add products to your page
Start by typing the categories you want to show. Leave blank and all products will pull in.
Layout can be set between a full width or contained carousel or a multiple row layout.

If you want to run a full width carousel, then also change the following settings.

Click on the edit button of the row container

row_settings_full_width2

A Row Settings popup will appear and change it from “Default” to “Stretch row and content”

row_settings_full_width

Product Categories

Front end preview:

text_block

If you want to display all your product categories with click through to that category.

Set the layout and then add the categories by typing the name and then adding them.

Must add full width settings screenshots here

If you want to run a full width carousel, then also change the following settings.

Click on the edit button of the row container

row_settings_full_width2

A Row Settings popup will appear and change it from “Default” to “Stretch row and content”

row_settings_full_width

Product Mini List

Front end preview:

text_block

Set the amount of items you want to display underneath each other
Open the section to add content (Hand 1)
Add column title (Hand 3)and then select your display type (Hand 4).
Display type – On Sale, Best Rated and Best sales will be data from all products on site.
Display type – Category can be selected if you want to show a specific category.
Add the amount of columns that you want to show in the frontend (Hand 5)

MINI_LIST

Get the look slider

Front end preview:

text_block

Here you can show 1 or 2 lifestyle images and list products that’s featured in these images.

Give each look a title and add a list of products(This would be products that you have added to WooCommerce already.

Add 2 background images.

Now click on the plus to add more sliders. (Hand 2)

look

Promo Slider

Front end preview:

text_block

Add this if you want to showcase a product on you home page.
Firstly, go to that product. (Products in your WP sidebar)

product_list

Now add a promo slide image. Make sure this image is about 2000px wide and that the right half of the image is nice and clean for text to display.
Save/Update this product

promo_slide

Now go to the page where you want to add this slider
Add the promo slider element and add the products by start typing the names of the products you want displayed in the slider.
Hit save

You can make this a full screen width element by doing the following

Click on the edit button of the row container

row_settings_full_width2

A Row Settings popup will appear and change it from “Default” to “Stretch row and content”

row_settings_full_width

Product promo blocks

Just type the product names you want to display and save.

Modern Launch Pads

Front end preview:

modern_launch_pads

Add a modern launch pad to your website.

Settings available in popup:

  • Header Placement
  • Header Flow
  • Image Height
  • Add multiple launch pads

modern_launch_pads

You can add as many launch pads as you want, however if you add more than 4 it defaults to a 3 per row layout.

Featured Content

Front end preview:

featured_content

featured_content_four

featured_content_three

featured_content_two

The featured content element allows you to promote content with a stylish layout, you can add the following data in the element popup:

  • Content layout
  • Row height
  • Add multiple featured items

featured_content_popup

Mosaic Promo

Front end preview:

mosaic_promo

Mosaic promo allow’s you to add rows of custom content with a stylish design and alternate layout.

Settings available in popup:

  • Mosaic Layout
  • Add multiple promo items

mosaic_promo_popup

Modern Product Slider

Front end preview:

modern_product_slider

Our modern product slider element allows you to connect to WooCommerce and create a beautifully designed slider from and array of options in the popup.

Settings available in popup:

  • Display Type
  • Maximum number of slides
  • Content Flow

modern_product_slider_popup

Content Icon Element

Front end preview:

content_icon

Content icon element allows you multiple columns of custom content and icon.

Settings available in popup:

  • List of multiple column content & icon selection

content_icon_popup

Mosaic Product List

Front end preview:

mosaic_product_list

Mosaic product list element allows you to connect to WooCommerce and create a beautifully designed mosaic layout of selected filters.

Settings available in popup:

  • Layout type
  • Product Filter
  • Content Flow
  • Total amount of rows

mosaic_product_list_popup

Stylish Grid

Front end preview:

trends

Stylish grid allows you to create beautifully designed layout, you will have a selection of several different layouts.

Settings available in popup:

  • Layout type
  • Content position
  • Add content for the stylish grid

trends_popup

Demo Page Setupcopy link

Here we’ll help you set up pages similar to the InVogue demo site.

Home

Go to the your Home page in the WP backend
The right hand column of the page will have a Page Attributes panel where you have to set the “Template” to “InVogue Home”

Activate the demo content

Go to your InVogue settings panel and open “Demos”
Choose the home page and then choose the home demo you want to activate
Please note that this will overwrite all other content on this page
Hit save
Go back to your Home page in the backend and you will now see all the content have been added.
Please also note that you still have to now go and add your own content like products, posts, images etc. This is purely adding the structure from our home page demo.

Click on the Backend Mode button

page-structure
Your page will look something like this

Hover over each row and edit each of them by clicking on the pencil button to open the relevant popup.

edit_element

Keep another browser tab open with the frontend view of this page and flick between them to see your changes.

Slider setup
Go to your InVogue settings panel
Browse to Home Slider
Now add your slides and add some text and images
Save your settings and this will now be reflected on your home page
Go to your home page and in the right hand side you will have to set the template to the Home Template

About

Start off by adding your members. See People Profile below
Create an about page under “Pages” in your WP side bar.
On this page, go to Page Attributes in the right hand column and choose the InVogue About Template.
This will now pull in all the profiles from the Members section

Use the Visual Composer to add more content to this page if needed

People profile

Browse to “Members” in your WP sidebar.
Add new member
Add a name at the top of this page
Add an Excerpt further down the page. This will be used as the introduction content.

Member Details
Add Position/Title
Add a background image
Add a signature if you want to be fancy☺
Set the colors for your heading text and social icons
Add a URL next to the social icons that you want displayed
Hit save

Now you have a basic profile page
You can add extra content by adding elements if needed.

Adding extra content on this page
Use the backend editor to add more content on your page
Add a content title element and then a text block element and maybe a blog element below
Please see the element documentation if you are unsure how to do this

WooCommercecopy link

Add simple products and assign to category
Watch Video

Grouped products
Watch Video

How to add variable products (E.g. size and color)
Watch Video

How to add a hover image for products (Secondary product image)
Browse to Products in your WP sidebar
Open one of your products
Assign a “product image” in the right hand side of the page and then
Scroll down the page and add a “Secondary Product Image” under “Additional Image Upload”

Maybe add image here

How to assign filters and widgets to your shop sidebar
Watch Video

Also show screenshots of what our demo site sidebar looks like

How to set my currency and country
Watch Video

PayPal
Watch Video

Coupons
Watch Video

Shipping

Part 9 – Shipping Settings Watch Video
Part 10 – Shipping Settings – Flat Rate
Part 11 – Shipping Settings – Free Shipping
Part 12 – Shipping Settings – International Flate Rate
Part 13 – Shipping Settings – Local Delivery
Part 14 – Shipping Settings – Local Pickup

Checkout Settings
Watch Video

Please view an extended list of WooCommerce video tutorials from WooThemes
Watch Video

Shop Sidebar and Widgetscopy link

To switch on a sidebar on your shop page, browse to your WP backend, browse to Appearance / inVogue Settings / WooCommerce and set your Shop Layout With Sidebar.

shoplayout

Once this is done, you can assign widgets to that sidebar. Browse to Appearance / Widgets. On the right hand side you will see a Shop Sidebar Widget. You can now drag WooCommerce items from the left into that widget area as shown below.

shopsidebar1

Have a look at the images below to see the exact widget structure that is shown on the inVogue demo website.

shopsidebar2

shopsidebar3

shopsidebar4

shopsidebar5

shopsidebar6

shopsidebar7

shopsidebar8

shopsidebar9

To add a banner image, use the Text Widget do do so. Upload n image to your Media Library first and reference it in the same way that we have done here.

inVogue Settingscopy link

General Settings, Styling, Typography, Header, Footer, Contact, Blog, Newsletter, Home Slider, Testimonials, Woo Commerce, Demo activation

General Settings

Add your Favicon
Change 404 page details
Add custom code

Styling

Accent Colors – These will be available throughout the site to use as your accent colors.
Button Styling – Here you can set the color for all buttons on the site. Set your own font, font color and button background color.
Tags, Block quote styling can be done as well. Change color and fonts for all of these.

Typography

The default fonts and font colors should be perfect for any brand and site that you want to build, but we also give you the opportunity to change all fonts of the theme.

We’ve included all Google fonts and you can assign one of 4 accent colors to any bit of content on the site. Accent colors can be done under “Styling”.

A lot of these fonts get used in more than one place; so make sure you check all pages after you have made your change.

Header

Set your navigation layout to include an eyebrow above your navigation or not.

Logo – Add your logo to the navigation. Make sure you upload it at about double the size you want it to display, to make sure it looks nice and crisp on all retina devices.

Sticky logo – You can upload a different logo for you sticky navigation if you want. Uploading the original logo is also fine.

Mobile Logo – Upload a smaller or less detailed logo here for your mobile navigation.

Layout Options – The following can be switched on or off – Login, Cart Icon, Wish list Icon, and Search Icon

Color and font settings for the full navigation can also be set here.

Social icons can be switched on. Set the primary color and hover color and choose which icons you want to show.

Footer

Choose your layout – You can choose to include columns with dynamic data or just a thin footer with some copy write info and maybe a list of your pages.

All text and text colors can be changed here. You can also change the footer background color.

Setting up your footer layout
Choose footer layout 2 or 3
Choose a footer column layout. Our demo site includes 4 columns, so we chose layout 1.
Save

Adding content to your footer
Now browse to Appearance / Widgets in your WP sidebar.
You will see the four widget areas on the right hand side of this page(Called Footer Column 1 – 4)
You can now drag items from the left into the widget areas on the right.

Blog

Set the following
Sidebar, no sidebar
Enable tags
Enable author’s bio
Enable social icons

Signup Popup

Activate a signup popup.
Assign it to any page of your website.
Get people to sign up for your newsletter
All data will be stored in your WP database
This can be found under “Signups” in the WP sidebar
Exporting of this data can be done via InVogue/ImportExport

Home Slider

Here you can set up a slider to be used on the home page of your site
Add a few slides and edit them individually at the bottom of this page.
Choose if you want to use images only or add your own text
The fonts can be set under the “Typography” page

WooCommerce

You can enable a sidebar for your products list page if needed
You can also enable social icons to be displayed
These icons can be set under the “sharing” tab

Sharing

Here you can select which icons you want displayed on the relevant sections
Please note that you still have to enable it on the relevant setting page to display.

Products – Go to the WooCommerce tab to enable
Blog – Go to the Blog tab to enable

Import Export

This can be used to import style settings from one install to another. Say for instance you work on a dev server and there’s some changes and want to now include them on your live site, then you can do the following.

Click on “Generate Export Options”, copy everything from the box.
Go to your new/live site and paste this into the import box and click on “Import Options”

Page Headerscopy link

At default all pages will have a clean white top section with the page name in the middle.

You can change this by adding a header image with custom content.

You can achieve the by doing the following:
Go to the page in your WP backend
Scroll down the page to the bottom where it says “Header Settings”
Here you can choose to have a background image or just a blank area
You can set the height of this area and add you own custom title and excerpt

The header will use the global H1 style. Can be set under “Typography”.
You have the ability to override the color of your global H1 color by adding a Header Font Color at the bottom of this page.

How do I recreate the text background effect on Lookbooks

On the lookbooks page we have a fancy heading with skew text in the background.

fashion_bg_text

Start off by going to the page in your WP backend.
Scroll down to Header Settings

Header Settings Backend

Select header layout one on the left
Upload a white background image with your words typed on the background.
Add a row height of 350
Add a Header Title and a Divider and Sub Title
Hit Update and you should be done

Here’s an example of what I have done to get the right effect.

fashion_bg_text2

Download Google font “Permanent Marker” and type out your words on the blank canvas and export your canvas at 72dpi, 2000px wide, 400px high.

How to add a slider to the top of my home page

Start off by setting up a few slides
This can be done via your inVogue settings panel
This can be found here – Appearance /  inVogue Settings / Home Slider

Slider1

Add a few slides and edit each by adding your own images and/or text

Slider2

Once happy with your slides, browse to your home page in your WP backend

Slider3

In the right hand column you will find a Page Attributes Panel
Here you will click on the Template dropdown and select “inVogue Home Template”
Update your page and the slider should now be active in the frontend

Can I update Visual Composer to the latest version?

We are using an Extended License for Visual Composer that is bundled within inVogue, so there’s no need to update it form your side. We will make sure that we update Visual Composer to the latest version with every big theme update that gets pushed out. You can then simply update your theme and Visual Composer will also be updated.

Visual Composer Backend Editor not showing

If you don’t see the Visual Composer Backend Editor button on a page in the theme backend, then you will have to switch on Visual Composer for that page.

VisualComposer2

Browse to Visual Composer / Role Manager / Visual Composer Settings.
Select Custom from the dropdown list and you will now see a list of custom post types that gets used in the theme.
Here you can now switch VC on for that page as shown below.

VisualComposer

Slider Revolution - How do I add a slider to a page?

Start off by creating a slider.
Once done with your slider, then copy the slider shortcode.

SliderRevolutionShortcode

This shortcode can now be used as a page header slider, or just in the content area on a page.

Adding a slider in your page header

Go to your page in the WP backend
Scroll right to the bottom of the page
Add the shortcode into the field called “Slider shortcode”

Adding a slider to page content area

Go to your page in the WP backend
Add the slider by adding a Text Block
Now add the slider shortcode to the text block and Save.

Slider1

slider_row

You can also add the slider that you have done, by just clicking on the Revolution Slider button and you will see a popup with a dropdown where you can now select the slider from the dropdown and Save.

Slider2

How do I recreate the text background effect for content headings like Home Four?

summer16

Start off by adding your content heading
Then edit the Row Settings / Design Options
Add the background image that you have designed and set the padding as shown in the picture below.

heading1

heading2

The font used is Permanent Marker and is a Google Font.
Make sure the font is nice and light, color wise, so it doesnt clash with the other heading.
Export the text as a jpeg.

hotbg2

Demo Recreate
Recreate the demo footerRecreate the home demoRecreate the contact pageRecreate the about pageSetting up the FAQ pageImport demo content
How to
Update the themeSetting up my menuShow hide sidebar in blogShow hide sidebar in shopSlider Revolution - DocumentationGet started with WPMLAdd a mega menu
Recommendations
Requirements for our themes

We'd love to help you

NOTE: It's that festive time of year again and we will be taking a short break to recharge from the 23rd of December 2016 until the 3rd of January 2017. During this time our support will be limited but we will try to respond to high priority tickets as best we can. Have a great holdiay!

While we will always do our best to get back to you within an hour or two, we ask that you please allow for a maximum of 24 hours for feedback. Monday - Friday

Support Includes

Bug fixing
How to questions
Assistance with integration

Support does not include

Support for 3rd party plugins
Custom Coding
Theme customization